Drover
** SPECIAL!! 3 Horse **

Steel slant load gooseneck horse trailer with front slant tack room and plexiglass side enclosures in horse area

Standard Features
Available sizes
2-HORSE gooseneck, 13' floor length w/2-3500# axles, 15" tires & 6-hole wheels
**3-HORSE gooseneck, 16' floor length w/2-3500# axles, 15" tires & 6-hole wheels**
3-HORSE gooseneck, 16' floor length w/2-5200# axles, 15" tires & 6-hole wheels
4-HORSE gooseneck, 20' floor length w/2-5200# axles, 15" tires & 6-hole wheels
5-HORSE gooseneck, 24' floor length w/2-7000# axles, 16" tires & 8-hole wheels
2-HORSE gooseneck, 13' floor length w/2-5200# axles, 15" tires & 6-hole wheels (6'-8" models)
3-HORSE gooseneck, 16' floor length w/2-5200# axles, 15" tires & 6-hole wheels (6'-8" models)
4-HORSE gooseneck, 20' floor length w/2-6000# axles, 16" tires & 8-hole wheels (6'-8" models)
5-HORSE gooseneck, 24' floor length w/2-7000# axles, 16" tires & 8-hole wheels (6'-8" models)

Dimensions
6'-6" body height
6' or 6'-8" body width, (6'-8" has no wheel well, 102" overall)
7' gooseneck length

Undercarriage
Rubber torsion axles with four wheel independent suspension and greasable hubs for easy lubrication
Electric brakes on all wheels
Radial tires on silver modular wheels with chrome center caps

Coupler & Jacks
Adjustable hitch stem with 2-5/16" coupler and safety chains with hooks
Heavy duty low profile gooseneck structure
Single speed drop-leg jack
Emergency breakaway system: switch, cable and battery box complete with battery (less charger)

Design Features & Hardware
Low profile 6" radius corner galvanneal roof
Windows in nose standard on all OTS CM Drovers
All steel frame with formed galvanneal side panels
Tapered nose with radius corners for aerodynamics, (6' models), 6' to 54"(6'-8" models) 6'-8" to 60"
52" sides with air spaces above
Treated floor
Steel hold backs on all full height doors
Slide-in plexiglass to cover air spaces on both sides
Greasable exterior hinges
Tag bracket
Chrome trim with colored vinyl insert
Pin striping (upper and lower region only)

Stall Area Equipment
Removable slant tubing dividers (per two stalls) with solid head partition
Quick release slam latches on all dividers
Rubber interior kick mat wall lining (1/4" thick), located on butt wall only with 3/4" plywood underneath
Vet type rubber floor mats (5/8" thick)
One-piece rear door matches sides with hold back
Side access door in first stall on street side
Feed bag rings (3 per stall)
Interior and exterior tie rings
Removable breast strap (located at first stall access door)

Lights
DOT required lighting (stop, turn, tail, tag, marker, clearance & conspicuity tape)
Dome lights (one in tack room and one in stall area)
All dome lights and loading lights are on a separate circuit
Front Tack Room Equipment
Dimensions: 2' to 6'6" x 6' wide plus 7' gooseneck or 2' to 6'6" x 6'-8" wide plus 7' gooseneck
Full height partition wall between stalls and front tack room
Full size access door with recessed locking handle 31-1/4" x 71" (6'-6" tall model) located on curb side
Four saddle racks on a tree and bridle hooks in tack room
Brush tray
Blanket bar