Drover SSL
Steel slant load gooseneck horse trailer with front slant tack room and plexiglass side enclosures in horse area

Standard Features
Available sizes
2-HORSE gooseneck, 14' floor length w/2-3500# axles, 15" tires & 6-hole wheels
3-HORSE gooseneck, 17' floor length w/2-3500# axles, 15" tires & 6-hole wheels
3-HORSE gooseneck, 17' floor length w/2-5200# axles, 15" tires & 6-hole wheels
4-HORSE gooseneck, 20' floor length w/2-5200# axles, 15" tires & 6-hole wheels
5-HORSE gooseneck, 24' floor length w/2-7000# axles, 16" tires & 8-hole wheels

Dimensions
6'-6" body height
7' body width
7' gooseneck length

Undercarriage
Rubber torsion axles with four wheel independent suspension and greasable hubs for easy lubrication
Electric brakes on all wheels
Radial tires on silver modular wheels with chrome center caps
Spare tire, wheel and rack

Coupler & Jacks
Adjustable hitch stem with 2-5/16" coupler and safety chains with hooks
Heavy duty low profile gooseneck structure
Single speed drop-leg jack
Emergency breakaway system: switch, cable and battery box complete with battery (less charger)

Design Features & Hardware
Low profile 6" radius corner galvanneal roof
All steel frame with smooth galvanneal side panels
Tapered nose with radius corners for aerodynamics 7' to 60"
Radius corner sliding window in each side of nose 14" x 34"
54" sides with air spaces above
Treated floor
Bolt-on aluminum mill finish fenders
Steel hold backs on all full height doors
Slide-in plexiglass to cover air spaces on both sides
Greasable exterior hinges
Rubber dock bumper below rear door
Tag bracket
Chrome trim with colored vinyl insert
Pin striping (upper and lower region only)
Three-piece side graphics

Stall Area Equipment
Removable slant tubing dividers (per two stalls) with solid head partition
Flush mount latches on all dividers
Composite wall board (3/8" thick) on head & butt walls
Vet type rubber floor mats (5/8" thick)
One-piece rear door matches sides with hold back
Feed bag rings (3 per stall)
Interior and exterior tie rings

Lights
DOT required lighting (stop, turn, tail, tag, marker, clearance & conspicuity tape)
Dome lights (one in tack room and one in stall area)
All dome lights and loading lights are on a separate circuit

Front Tack Room Equipment
Dimensions: 2' to 6’6" x 7' wide plus 7' gooseneck
Full height partition wall between stalls and front tack room
Full size access door with recessed locking handle 29" x 67" (6'-6" tall model) located on curb side
Four saddle racks on a tree and bridle hooks in tack room
Brush tray
Blanket bar